Connecting to a digital amplifier that is, Not dolby digital/dts/mpeg- compatible, Before using english – Pioneer PDV-LC10 User Manual
Page 31: Connecting the player to other components
31
En
BEFORE USING
English
DIGITAL IN
COLOR
BRIGHT MONITOR
DIGITAL OUT (OPTICAL)
PHONES
ON/OFF
HOLD
Connecting the Player to Other Components
Connecting to a digital amplifier that is not Dolby Digital/DTS/MPEG-
compatible
For instructions on making the audio settings, refer to “Setting the type of
amplifier to be connected (digital jack)” (page 45).
Main unit front panel
See page 29 for details
on connections to the
TV.
Optical digital cable (not included)
To digital audio
input jack
: Signal flow
Notes:
• Carefully check the player’s digital output
settings (page 45) before connecting the
player to an amplifier equipped with a
digital audio input jack which is not Dolby
Digital/DTS/MPEG-compatible. Playing
DVDs when the audio settings are not
correct may cause strong noise which
could damage your speakers.
• The CD shockproof function (for
preventing skipping when playing music
CDs) will not work when an optical cable
is connected. Do not subject the player to
shocks during playback.
• With the PDV-LC10, no sound is produced
from the player’s speakers when an
optical cable is connected.