Pioneer PDV-LC10 - Manual (Page 45)

45
En
BASIC OPERA
TION
English
Making Settings with the Setup Navigator
Use the cursor buttons ( 5/∞) to
select the digital signal with
which the amplifier is compatible,
then press the ENTER button.
• Dolby Digital: Select this when the amplifier
or decoder connected to the player is
compatible with Dolby Digital signals.
• Dolby Digital/DTS: Select this when the
amplifier or decoder connected to the player is
compatible with Dolby Digital and DTS signals.
• Dolby Digital/MPEG: Select this when the
amplifier or decoder connected to the player is
compatible with Dolby Digital and MPEG
signals.
• Dolby D/DTS/MPEG: Select this when the
amplifier or decoder connected to the player is
compatible with Dolby Digital, DTS and MPEG
signals.
• PCM: Select this when the amplifier
connected to the player is a stereo amplifier or
a Dolby Pro-Logic compatible amplifier.
• Not connected: Select this when no amplifier
is connected or when you do not know the
type of the connected amplifier. When this is
selected, there is no need to make the
“Amplifier’s 96 kHz Compatibility” setting, so
proceed to “Quitting the Setup Navigator”
(page 47).
Setting the type of amplifier to be connected (digital jack)
Here set the type of digital signal the amplifier connected to the player’s digital
output jack is compatible with.
Main unit
Remote control unit
ENTER
Cursor
buttons
4
1
e 8 E 7
3 ¡
¢
ENTER
Cursor
buttons
i
Setup Navigator
Audio1 General Language Other Video 2
Move Exit SETUP Select ENTER
Amp Connection
Digital Jacks
Not Connected
Dolby D/DTS/MPEG
Dolby Digital/MPEG
Dolby Digital/DTS
PCM
Dolby Digital
Compatible with Dolby Digital