Pioneer PDV-LC10 - Manual (Page 47)

47
En
BASIC OPERA
TION
English
Making Settings with the Setup Navigator
Quitting the Setup Navigator
Here select whether or not to set, cancel, or redo the settings that have been
automatically set by the player.
Main unit
Remote control unit
ENTER
Cursor
buttons
ENTER
Cursor
buttons
SETUP
SETUP
Hint:
• Only the basic settings are set with the
Setup Navigator. To make more detailed
settings, settings must be made using the
setup screen. Refer to pages 57 to 74.
• To restore the settings made with the
Setup Navigator to the factory defaults,
slide the power button while pressing in
the RETURN button. (Page 118)
Use the cursor buttons ( 5/∞) to
select how to quit the Setup
Navigator, then press the ENTER
button.
• Valid: Select this to set the settings
made with the Setup Navigator.
• Invalid: Select this if you do not want
to change the settings.
• Redo: Select this to start the settings
over from the beginning.
When “Valid” or “Invalid” is selected
and the ENTER button is pressed, the
Setup Navigator quits and the screen
shown below appears automatically.
Press the SETUP button to close the
Setup Navigator screen.
i
Setup Navigator
Audio1 General Language Other Video 2
Move Exit SETUP Select ENTER
Confirm setup adjustments
Exit Setup Navigator
Redo
Invalid
Valid
i
Setup Menu Mode
Setup Navigator
Parental Lock
Basic
Level8
Audio1 General Language Other Video 2
Move Exit SETUP Select ENTER
Setup connected TV/amp and
disc language simultaneously
4
1
e 8 E 7
3 ¡
¢