Powerware 9395 UPS and Plus 1 UPS 650825 kVA User Manual
Page 161
UPS OPERATING INSTRUCTIONS
EATON Powerware
®
9395 UPS (650–825 kVA) Installation and Operation Manual
S 164201725 Rev 2 www.powerware.com
7−19
C
A
U
T
I
O
N
Do not attempt to restart the system after the REPO until the cause of the shutdown has been identified and
cleared.
2.
To deactivate the REPO switch in preparation for restarting the UPS, insert the
supplied key and rotate clockwise until the red pushbutton releases (see
Figure 7-7). To remove the key, rotate the key back to the vertical position.
3.
Restart the UPS by following the procedure in paragraph 7.3.1 on page 7−11 or
7.3.2 on page 7−12.
W
A
R
N
I
N
G
Power is present inside the UPS cabinet until the upstream input feeder circuit breaker is opened.
Deactivated
Unlock pushbutton to release
Activated
Pushbutton locked into place
Figure 7-7. REPO Operation