PLUS Vision M-5 - Manual (Page 12)

12
(4) Mount the 2 upper and 2 lower brackets included
with the copyboard using M4 x 12 screws.
• Both of the left and right upper brackets are installed in
the same orientation.
M4 ן12 screws Lower bracket
M4
ן12 screws Upper bracket
M4 ן12 screws Upper bracket
Wall mount bar
Upper bracket
Wood screw or anchor
bolt
(M6 or the equivalent)
Lower brackets
(5) Hang the copyboard to the wall mount bar and
fasten the lower brackets.
ቢ Catch the left and right upper brackets mounted on
the copyboard onto the wall mount bar.
ባ Fix the left and right lower brackets to the wall surface.
(The way in which the brackets are fixed to the wall
depends on the type of installation to the wall.)
CAUTION
• The upper brackets are not fastened. Do not let the
copyboard slide too much when fixing the lower brack-
ets. Doing so may cause the copyboard to come off the
wall mount bar and fall, resulting in injury.
• At least two people should hold the copyboard to pre-
vent it from dropping or tipping over, resulting in unex-
pected injury.