PLUS Vision M-5 - Manual (Page 20)

20
Names of Main Unit Controls and Connectors
MEMORY
POWER
CLEAR
POSITION
FEED
/STOP
M
EM
O RY
P O W
ER
CLEAR
POSITION FEED /STOP
ቫ
ቪ
ቨ
ብ
ቤ
ቦ
ባ
ቢ
ቧ
ቩ
The connectors are located
on the bottom side of the
copyboard.
When set vertically
The connectors are
located on the left side
of the copyboard.
ቢ POWER button
Use this to turn the power on and off.
ባ POWER indicator (Green)
This lights when the power is turned on and turns off
when the power is turned off. The indicator flashes to
indicate errors or the operating status.
ቤ MEMORY button
Use this to save drawings, words, etc., you have drawn
or written on the sheet surface into the memory.
ብ MEMORY indicator (Amber)
This blinks when the data is being stored in the
memory. Depending on the speed at which it is blink-
ing, it may also indicate an error.
ቦ FEED/STOP button
Use this to automatically feed 1 sheet or to stop feed-
ing.
ቧ CLEAR button
Use this to clear all the image data in the built-in
memory (when pressed for at least 3 seconds).
ቨ Card slot
This card slot is exclusively for CF memory cards.
ቩ POSITION button
(pin hole – button is located at bottom of hole)
Use this to switch the image to be stored in the memory
between the vertical and horizontal mode.
ቪ DC power jack
Connect the DC side of the AC power adapter here.
(Never connect anything other than the dedicated AC
adapter.)
ቫ USB connector (type B)
Connect this to a computer’s USB port (type A).
Notice:
Indicator blinking frequencies and terms used in this manual
The blinking of the indicators is used to indicate both the copyboard’s operating status and errors. In this manual the
frequencies are expressed as shown below.
Terms in manual Blinking frequency Diagram of flashing
Blinking slowly Lit 0.5 seconds, off 0.5 seconds
Blinking quickly Lit 0.25 seconds, off 0.25 seconds
Blinking intermittently Lit 0.25 seconds, off 0.25 seconds,
lit 0.25 seconds, off 1.25 seconds
Error blinking The (amber) Memory indicator and the (green)
Power indicator blink alternately at high rate.