Patton electronic 29XX - Manual (Page 110)

Dial Out Details window 110
Access Server Administrators’ Reference Guide 8 • Dial Out
• dspLinkErr(35)
• dspPutMsgErr(36)
• lisIpcErr(38)
• dspOpenErr(39)
• invalidCode(40)
• dspCommErr(42)
• unknownBearerContent(43)
Modulation (doactModulation)
The modulation of the link:
• unknown(0)—unknown modulation
• v21(1)—v.21 modulation
• v22(2)—v.22, v.22bis modulation
• v32(3)—v.32, v.32bis modulation
• v34(4)—v.34 modulation
• k56(5)—K56 Flex modulation
• v90(7)—v.90 modulation
• v110(8)—v.110 ISDN connection
• isdn64(9)—64k ISDN connection
• isdn56(10)—56k ISDN connection
• phase2(20)—currently training to a modulation
• answerAck(21)—acknowledge state of the modulation
• v92(22)—v.92 modulation
• moh(23)—Modem is using v.92’s modem on hold feature
• v23(24)—v.23 modulation
Speed (doactTxSpeed)
The transmit (in relation to the access server) speed of the modulation.
Dial Out Details window
The Dial Out Details window (see figure 42 ) shows the active Dial Out configuration of the access server.
Scroll down the window to view additional Dial Out access server parameters.You can modify Dial Out
parameters by clicking on the
Modify … link (see figure 42 ). For more information about modifying Dial Out
settings, refer to “Dial Out Modify window” on page 111.