Patton electronic 29XX - Manual (Page 210)

Introduction 210
Access Server Administrators’ Reference Guide 17 • MFR Version 2
Introduction
The MFR Version 2 window (see figure 88 ) contains objects for networks that use Signalling System R2. (To
set up R2 Signalling in the access server, refer to Recommendations Q.400—Q.490 and to the host country’s
PTT for national signalling specifications).
Figure 88. MFR Version 2 main window
Click on MFR Version 2 under the Configuration Menu to display the MFR Version 2 main window.
MFR Version 2 main window
The MFR Version 2 window displays parameters for networks that use Signalling System R2. The MFR Ver-
sion 2 window also has the Modify link that you can click to modify Line Signalling parameters (see
“MFR
Version 2—Modify” on page 212).
Line Signalling
This portion of the MFR Version 2 main window contains information described in the following sections.
Country (lineSigCountry)
Displays a particular country or itu Standard. Custom allows for any values in the following fields (Line Signal-
ling objects are country-specific. Please refer to the host country’s PTT for national signalling specifications).