Patton electronic 29XX - Manual (Page 70)

Dial In Modify default window 70
Access Server Administrators’ Reference Guide 7 • Dial In
Modify Attempts
This portion of the Dial In Modify default window (see figure 28 ) describes modifying the login attempts
parameters for dial in users.
Figure 28. Dial In Modify window (modify Attempts, Configuration, and Maximum Time objects)
Failure Banner (diFailureBanner)
This defines a message of up to 254 characters in length that will be displayed to a user if authentication fails.
This message only appears when the authentication technique is Text.
Success Banner (diSuccessBanner)
The string sent to the dial-in window after a text login is authenticated successfully. The string can contain any
printable characters with the exception of the excape character (\). The following special sequences are recog-
nized and will be replaced before being sent to the customer:
• \r— carriage return
• \n—replaced with a new line
• \t—replaced by a tab
• \M—replaced by the MTU (maximum transfer unit)
• \I—replaced by the IP address assigned to the connection