Configuring the remote end using microsoft windows – Patton electronic 29XX User Manual
Page 325
Advertising
Configuring a leased line/dedicated line connection
325
Access Server Administrators’ Reference Guide
C • Technical Reference
ping and beginning a new call. It is recommended to leave this value at the default unless directed to
change by technical support
Configuring the remote end using Microsoft Windows
1. After installing the modem driver, uncheck
Wait for dial tone before dialing
under the
General
tab of the
modem properties.
Figure 136. Modem properties window
2. Uncheck
Use dialing rules
in the
DUN Connection
under the
General
tab.
3. Set the phone number to 1. This phone number is required to make the dial-up connect work as it is pro-
vided by windows. The phone number is not used for the dedicated line.
Advertising