Patton electronic 29XX - Manual (Page 245)

System Log—Modify 245
Access Server Administrators’ Reference Guide 21 • System Log
• priorityInfo(20)
• priorityOddity(40)
• priorityService(60)
• prioritySystem(80)
• priorityDisable(1000)
Min Priority for RAM (SyslogTablePriority)
System messages which have a priority equal to or greater than this setting will appear in System Log—Volatile
Memory. The lower the number next to the priority listed below, the more details system logging will provide.
PriorityVerbose will generate the most messages, while priorityDisable will turn off all messages.
• priorityVerbose(5)
• priorityDebug(10)
• priorityInfo(20)
• priorityOddity(40)
• priorityService(60)
• prioritySystem(80)
• priorityDisable(1000)
Unix Facility (syslogUnixFacility)
This setting is used when syslog messages are sent to a Unix-type syslog daemon. In this case the message will
include the facility and priority coding. Syslog messages from the access server can be directed to an individual
log file by selecting local0–local7. Syslog messages will be directed to a file called local0 if local0 is selected.
Note The Syslog Daemon must be configured to direct incoming Syslog messages
to different files. If it is not configured correctly, the Syslog messages will be
dropped. The messages will not be recorded in the primary Syslog file.
• disable(0)
• user(1)
• mail(2)
• daemon(3)
• auth(4)
• syslog(5)
• lpr(6)
• news(7)
• uucp(8)
• cron(9)