Patton electronic 29XX - Manual (Page 61)

Dial Telco window 61
Access Server Administrators’ Reference Guide 7 • Dial In
• Kill—The administrator can manually disconnect the user by activating this parameter.
• Dead—The user’s call has been disconnected. This message disappears when the linger time expires.
• Bury—The call has been killed and removed from the dial-in main window.
Transmit Connection Speed (diactTxSpeed)
The connected speed of the modem link (for example, 28.8 bps). These values, in bits per second, range from
300–33,600.
WAN Link (diactLinkIndex)
The T1/E1 WAN port number that the call is on.
Time Slot (diactSlotIndex)
Shows which T1/E1 channel the call is on. This is a number from 1-30.
Time Call Is/Was Active (diactSessionTime)
The amount of time the call was/is active.
Termination Reason (diactTerminateReason)
The reason a call was disconnected. For the listing of reasons, see “Termination Reason (diactTerminateRea-
son)” on page 91.
State at termination (diactTerminateState)
Indicates the value of diactState when the call was terminated. A value of 0 indicates the call is still online.
Number Called (diactNumberDialed)
The phone number that was used to dial into the access server.
Number Called From (diactCallingPhone)
The user’s phone number—this is a caller ID feature.