Introduction, Rip version 2 main window, Route changes made (rip2globalroutechanges) – Patton electronic 29XX User Manual
Page 220: Responses sent (rip2globalqueries), Address (rip2ifconfaddress), Send (rip2ifconfsend)
Introduction
220
Access Server Administrators’ Reference Guide
18 • RIP Version 2
Introduction
The RIP Version 2 main window (see
) describes routing information as defined by the Routing
Information Protocol (RIP). All object identifiers described in this chapter comply with those contained in
RFC 1389: RIP Version 2 MIB Extension.
\
Figure 90. RIP Version 2 window
Click on
RIP Version 2
under the
Configuration Menu
to display the RIP Version 2 main window.
RIP Version 2 main window
The RIP Version 2 window describes routing information as defined by the Routing Information Protocol
(RIP). The window also contains the following links:
•
Statistics (xxx.xx.xxx.xxx)—Clicking on the link under the Address column displays the RIP Version 2 Sta-
tus window (see
on page 223) where you can view routing and update informa-
tion for each subnet address
•
Address—Clicking on this link displays the RIP Version 2 Configuration window (see
on page 222). This window is where you can configure objects for each subnet address
including authentication method, RIP Version 1 or Version 2 compatibility, and metric value.
Route Changes Made (rip2GlobalRouteChanges)
The number of route changes made to the IP Route Database by RIP. This does not include the refresh of a
route's age.
Responses Sent (rip2GlobalQueries)
The number of responses sent to RIP queries from other systems.
Address (rip2IfConfAddress)
The IP address of the interface on the access server.
Send (rip2IfConfSend)
The types of RIP packets the router sends on this interface.
•
doNotSend (1)