Patton electronic 29XX - Manual (Page 153)

DSP information window 153
Access Server Administrators’ Reference Guide 11 • Digital Signal Processing (DSP)
Successful Connects (dspSuccessfulConnects)
The number of calls that successfully connected.
Failed Connect (no far modem) (dspFailedConnectPreV8)
The number of calls that failed before modulation V8 was completed.
Failed Connect (bad negotiation) (dspFailedConnectPostV8)
The number of calls that failed to after V8 modulation was completed.
Remote—Retrains (dspRemoteRetrains)
The number of times the remote modem has asked for a retrain to be done.
Remote—Renegotiates (dspRemoteRenegotiates)
The number of times the remote modem has asked for a renegotiation to be done.
Local—Retrains (dspLocalRetrains)
The number of times the local DSP has requested a retrain to be done.
Local—Renegotiates (dspLocalRenegotiates)
The number of times the local DSP has requested a renegotiation to be done.
Page Requests(dspPageRequests)
This is the number of page requests the DSP has made. The DSP does not have enough memory to hold all of
the modulation protocols. The DSP will make a page request when it needs to download a new protocol not
currently in its memory.
Debug Statistics
This portion of the DSP information window (see figure 63 on page 151) shows statistics on DSP rebooting.
The information contained within these MIB variables are subject to change without notice.
Reserved A (dspReservedA)
No assigned functionality at this time
Reserved B (dspReservedB)
No assigned functionality at this time.