Patton electronic 29XX - Manual (Page 280)

WAN Circuit CONFIGURATION window 280
Access Server Administrators’ Reference Guide 23 • Sync PPP
State (pppActState)
This is the current state of the PPP negotiation process.
• restarting(1)—the link is currently restarting due to a configuration change or line error
• connecting(2)—the link is currently connecting
• lcpNegotiate(3)—PPP LCP negotiation is in progress
• authenticating(4)—Either local or remote side is authenticating the user if enabled
• pppUp(5)—the PPP link is up
• disconnecting(6)—the link is currently disconnecting
• dead(7)—the link is currently dead
• onlineBcp(8)—BCP has been negotiated and data can be passed across the link
• onlineIpcp(9)—IPCP has been negotiated and both sides have agreed on IP addresses and data can be
passed across the link
Ip Address (pppServiceIpAddress)
The IP address assigned and negotiated for this interface. The default IP address is 192.168.200.1 and should
be changed to match your network.
Ip Mask (pppServiceIpMask)
The IP net mask configured for this link.
Default Settings
Clicking on the Default Details… or Modify default… links on the PPP main window brings up the default
settings window. These are the default settings each PPP link will take when first initialized. Settings for indi-
vidual links can be changed (this is described in a later section).
Figure 118. Default settings window