Panasonic KX-HGW600 - Manual (Page 104)

Operating Instructions
104
To change or delete entries
1. Click [Packet Filtering] on the Setup Page.
2. Click the entry number you want to change or delete in the Current Status table.
3. Change the settings and click [Change]. To delete, click [Delete].
• To clear the current settings, click [Clear].
Note
Do not enter the space in each data field.
4. When you have finished, click [Save]. The settings will be saved.
5. Click [Restart Now!].
To change the priority
Packet Filtering is processed from the lower entry number to the higher entry number.
To change the priority of the entry number, enter the source entry number in the left data
filed and the destination entry number in the right data filed. Then click [Move] and
[Save]. Click [Restart Now!] on the Setup Page.
<Example>
To prevent the outside network from accessing the communications between Windows
NT and Windows 2000 PCs.
Type Direction
IP
Address
Port
IP
Address
Port Protocol
Log
Output
Do Not
Permit
L W 135 TCP&UDP Y
Do Not
Permit
L W 135 TCP&UDP Y
Do Not
Permit
W L 135 TCP&UDP Y
Do Not
Permit
W L 135 TCP&UDP Y
Do Not
Permit
L W 445 TCP&UDP Y
Do Not
Permit
L W 445 TCP&UDP Y
Do Not
Permit
W L 445 TCP&UDP Y
Do Not
Permit
W L 445 TCP&UDP Y