Panasonic KX-HGW600 - Manual (Page 108)

Operating Instructions
108
Note
When you access the Camera Portal page from the WAN side, PPPoE Connection
cannot be disconnected.
DNS Relay
DNS Relay function frees you from setting up the DNS server address in each device
on the LAN side, even though it is set up with static IP address. This function distributes
the DNS server address to the Network Camera and the PC on the LAN side.
Note
When the DNS server is connected to the LAN side, do not use this function.
Connection
• Always
• Automatic
• Manual
The PPPoE Connection is online as long as the KX-HGW600 is
turned on. This is the default setting. This allows you to stop the
PPPoE Connection manually on the PPPoE Connection window
(
Page 115). To initiate the PPPoE Connection again, restart
the KX-HGW600.
The PPPoE Connection is online only when data is being sent to
the Internet from each device on the LAN side. This allows you to
initiate/stop the PPPoE Connection on the PPPoE Connection
window. (
Page 115)
The PPPoE Connection is online only when you click [Connect]
on the PPPoE Connection window (
Page 115). To stop the
PPPoE Connection, click [Disconnect] on the PPPoE
Connection window.
Disconnection on
Idle If Enabled is checked, the KX-HGW600 detects when the
PPPoE Connection is idle and will automatically disconnect it
when the length of idle time exceeds the user-specified limit.
When you use this function, check Enabled and specify the time
(1-99 minute). When you check Always, the timer does not work.
Use The KX-HGW600 communicates with the Network Camera and
PCs on the LAN side as a substitute for the DNS server.
(The default setting is "Use".) When static IP address is assigned
to each device on the LAN side, enter the IP address of the
KX-HGW600 (192.168.0.254) in the network or TCP/IP
properties window of each device.
Do Not Use This function does not work. When static IP address is assigned
to each device on the LAN side, enter the IP address of the
specified DNS server in the network.