Panasonic KX-HGW600 - Manual (Page 86)

Operating Instructions
86
Encryption
Encryption window allows you to encrypt the data that is transmitted over your
wireless network. By setting a WEP key in the KX-HGW600, you can prevent wireless
network data from being decrypted externally. To read an encrypted data, all the
wireless devices must set the same WEP key.
The KX-HGW600 supports not only Shared Key but Open System as the encryption
system and switches automatically to the encryption system corresponding to each
wireless device.
Note
The WEP key is created by the passphrase. There are two types of WEP keys:
40(64) bit and 128 bit.
128 bit encryption is more secure than 40(64) bit encryption.
1.
Click [Encryption] on the Wireless Setup window.
2.
Select Enabled (40(64) bit) or Enabled (128 bit) from the drop-down menu.
KX-HGW600
WEP key:1010101010
WEP key: 1010101010
WEP key: None
??
Not accessible