Panasonic KX-HGW600 - Manual (Page 60)

Operating Instructions
60
2. Select Camera Name from the drop-down menu.
For confirmation, the image appears.
The image resolution differs from the settings on the Recording Setup window.
3. Select Enable or Disable.
Note
The KX-HGW600 has two timer settings.
4.
Check the desired day of the week.
If the setting time passes over midnight, please check the day of start time.
The start and end time is set only in 24h time mode.
5. Set the start and end time.
6. When you have finished, click [Save]. The settings will be saved and a "Success"
message appears on the display.
When the Network Camera is reserved for the timer recording, the [REC] button
is changed to [Reserved]. The [REC] buttons of the other Network Cameras are
displayed as [Timer].
Note
Do not overlap the timer settings between Timer 1 and Timer 2.
Overlapped timer settings cause you to stop recording.
Start
9 : 00 12 : 00
Timer 1
End
Start
9 : 00 12 : 00
Timer 1
End
Start
10 : 00 15 : 00
Timer 2
End
Start
13 : 00 15 : 00
Timer 2
End
Good
example
Bad
example