Panasonic KX-HGW600 - Manual (Page 113)

Operating Instructions
[For assistance, please call: 1-800-272-7033] 113
S
ystem
Featur
es
4. Click [Upgrade]. The firmware is updated.
5.
Click [Restart Now!].
Notes
• After updating, initialize the KX-HGW600 by pushing the FACTORY
DEFAULT RESET button (
Page 124) if required. For more information,
please refer to the Panasonic web site.
• When you use the DHCP server function ( Page 106), restart all the
devices on the LAN side.
Error Messages
• If completed, the dialog box
appears.
• If not completed, an error message
appears. For more information,
please refer to "Error Messages"
below.
Error Messages Cause and Remedy
File size is invalid
CRC error occurred Your selected firmware file is damaged. If the firmware file
was downloaded from the Panasonic web site, download it
again.
Selected file is invalid
Update it again. Your selected firmware file is not for the KX-HGW600.
Reselect the proper file.
OR
Make sure your hardware version matches the firmware file
by reading the readme file that comes with the firmware file
(
Page 118). If not, download the latest firmware from the
Panasonic web site.
Not enough memory The KX-HGW600’s internal memory has been depleted.
Restart the KX-HGW600 and update it again.