Panasonic KX-HGW600 - Manual (Page 23)

Operating Instructions
[For assistance, please call: 1-800-272-7033] 23
Set
u
p
2.2.2 Setting up the KX-HGW600
Confirming the KX-HGW600 Setup
The KX-HGW600 has an integrated web server. If you can access the Camera Portal
page, the network configuration between the KX-HGW600 and the PC has been
successfully made.
1.
Confirm the setup of the TCP/IP properties window on the PC.
For more information, please refer to Page 129.
2. Start up your web browser.
3.
Enter "http://192.168.0.254(:Port No.)" in the address field of your web browser.
The Camera Portal page appears.
• When port no. is 80 (default setting), you do not need to enter port no.
If the Camera Portal page does not appear ( Page 141)
• Make sure "http://192.168.0.254(:Port No.)" has been correctly entered into
the address field.
• Make sure the indicators light green.
• Make sure the KX-HGW600 is turned on first, then the PC.
• The proxy server setting of your web browser may be needed to access the
Camera Portal page. For more information, please refer to Page 126.
4.
Click [Setup Page].
The authentication window appears.