Panasonic KX-HGW600 - Manual (Page 106)

Operating Instructions
106
3. When you have finished, click [Save]. The settings will be saved.
4. Click [Restart Now!].
<Instructions for the data fields>
IP Address (LAN)
DHCP
When you use the DHCP server function, the KX-HGW600 can assign an IP address
automatically to each device on the LAN side.
IP Address (LAN) Enter the IP address on the LAN.
(The default setting is "192.168.0.254".)
The IP address must be entered out of the Available Address
Range in the DHCP setting.
Subnet Mask Enter the Subnet Mask on the LAN.
(The default setting is "255.255.255.0".)
Port No. of WWW
Server
Enter the port number of the web server.
(The default setting is "80".)
DHCP Server This function enables the KX-HGW600 to assign an IP address
automatically to each device on the LAN side. (The default
setting is "Use".) To assign the IP address manually to each
device on the LAN side, check Do Not Use. In this case, the
Automatic Setup function does not work.
Available
Address Range When you use the DHCP server function, enter the range of the
private IP addresses, 32 to 128 addresses. Change them only
when necessary. The last 16 addresses (default setting:
192.168.0.113-192.168.0.128) of 128 addresses are reserved for
Network Camera. Enter the value greater than "192.168.0.32".