Powerware UPS Sidecar Powerware 9390 - Manual (Page 12)

INTRODUCTION
EATON Powerware ® 9390 UPS Sidecar Installation and Operation Manual S 164201586 Rev E www.powerware.com 1-6
1.4 Safety Warnings
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during installation and maintenance of
the UPS Sidecar. Please read all instructions before operating the equipment and save this manual for future
reference.
The UPS Sidecar is designed for industrial or computer room applications, and contains safety shields behind
the front panel. However, the UPS system is a sophisticated power system and should be handled with
appropriate care.
D A N G E R
This UPS system contains LETHAL VOLTAGES. All repairs and service should be performed by
AUTHORIZED SERVICE PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS inside the UPS.
W A R N I N G
S The UPS system contains its own energy source (batteries). The output terminals may carry live voltage
even when the UPS is disconnected from an AC source.
S To reduce the risk of fire or electric shock, install this UPS Sidecar in a temperature and humidity
controlled, indoor environment, free of conductive contaminants. Ambient temperature must not exceed
40
°C (104°F). Do not operate near water or excessive humidity (95% maximum). The system is not
intended for outdoor use.
S Ensure all power is disconnected before performing installation or service.
C A U T I O N
S Never dispose of batteries in a fire. Batteries may explode when exposed to flame.
S Keep the UPS Sidecar front panel installed to protect personnel from dangerous voltages inside the unit.
S Do not operate the UPS system close to gas or electric heat sources.
S The operating environment should be maintained within the parameters stated in this manual.
S Keep surroundings uncluttered, clean, and free from excess moisture.
S Observe all DANGER, CAUTION, and WARNING notices affixed to the inside and outside of the
equipment.
1.5 For More Information
Refer to the Powerware 9390 UPS (40–80 kVA) Installation and Operation Manual or the
Powerware 9390 UPS (100–160 kVA) Installation and Operation Manual for the following
additional information:
S UPS cabinet, optional components, and accessory installation instructions,
including site preparation, planning for installation, and wiring and safety
information. Detailed illustrations of cabinets and optional accessories with
dimensional and connection point drawings are provided.
S UPS operation, including UPS cabinet controls, functions of the UPS, standard
features and optional accessories, procedures for starting and stopping the UPS,
and information about maintenance and responding to system events.
S Communication capabilities of the UPS system.
Visit www.powerware.com or contact your Eaton service representative for
information on how to obtain copies of these manuals.