Powerware UPS Sidecar Powerware 9390 - Manual (Page 24)

INSTALLING THE UPS SIDECAR
EATON Powerware ® 9390 UPS Sidecar Installation and Operation Manual S 164201586 Rev E www.powerware.com 2-8
2.4.3 Standalone Parallel Redundant Installation
Use this procedure to install separately located UPMs (see Figure 2-4). UPM 1 has the
Sidecar installed. The UPS Sidecar is a factory-installed integral part of the standard
UPS cabinet.
UPM 1 UPM 2
UPS Sidecar
Figure 2-4. Typical Standalone Parallel Redundant System (80 kVA System Shown)
1. Verify that the UPM 1 is properly installed and secured. Refer to the applicable
Powerware 9390 installation and operation manual, listed in paragraph 1.5, for
installation instructions.
2. Verify that the UPM 2 is properly installed and secured. Refer to the applicable
Powerware 9390 installation and operation manual, listed in paragraph 1.5, for
installation instructions.
3. Continue to paragraph 2.4.4.