Pioneer AVIC-Z3 - Manual (Page 107)

2 Touch 0 — 9 to input the desired num-
ber.
3 While the input number is displayed,
touch [Enter].
Operating the Radio (FM)
You can listen to the radio by using the naviga-
tion system. This section describes operations
for Radio (FM).
Selecting [FM] as the source
% Touch the source icon and touch [FM].
= For details, refer to Selecting a source on
page 97
Screen configuration
1 2 7
5
6
4 3
1 Source icon
Shows which source has been selected.
2 Band indicator
Shows which band the radio is tuned to: FM1
to FM3.
3 Preset number indicator
Shows the program type of the current station
(when available).
4 Frequency indicator
Shows to which frequency the tuner is tuned.
5 Preset list display
Shows the preset list.
6 LOCAL indicator
Shows when local seek tuning is on.
7 STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
Touch panel key operation
% Touch the source icon and then touch
[FM] to select the radio (FM).
When the source icon is not displayed, you
can display it by touching the screen.
Touch panel keys
1
2
5 3
4
1 Touch: Recall the preset station
Touch and hold: Store the broadcast
station
You can register the frequency currently
being received to the preset list. You can ea-
sily store up to six broadcast frequencies
for later recall with the touch of a key.
p Touch to recall the preset frequency.
p Up to 18 stations, 6 for each of three FM
bands can be stored in memory.
2 Touch: Perform manual tuning
To perform manual tuning, touch
or
briefly. The frequencies move up
or down one step.
Touch and hold: Perform seek tuning
To perform seek tuning, keep touching
or for about one second
and release. The tuner will scan the fre-
quencies until a broadcast strong enough
for good reception is found.
p You can cancel seek tuning by touching
either or briefly.
p If you keep touching
or
, you can skip broadcasting fre-
quencies. Seek tuning starts as soon as
you release the keys.
p You can also perform these operations
by using TRK (c/d) button.
3 Tune in strong signals
= For details, refer to Tuning in strong sig-
nals on page 109
4 Store the strongest broadcast frequen-
cies
Using the AV Source (Built-in DVD Drive and Radio)
En
107
Chapter
12
Using
the
A
V
Source
(Built-in
DVD
Drive
and
Radio)