Pioneer AVIC-Z3 - Manual (Page 181)

The address does not exist.
Do you want to continue ?
The house number entered does not
exist in the database for the speci-
fied street. Re-enter the existing house number. Or, pro-
ceed to the next step without entering the
house number and set the main point of that
street as your destination.
This area does not contain
any POI's of the selected type. Facilities of the selected category do
not exist in the surrounding areas. Use another search method or move to an-
other location and perform
Vicinity Search
again.
Failed to make the route pro-
file. In rare cases, a route calculation
error may occur. ! Retry.
! Consult the Pioneer Local dealer if this mes-
sage persists.
There is no Traffic List. There is no available traffic informa-
tion now. Move to the location where you can receive
the XM NavTraffic information, and then try
the operation again.
There is no pictures folder.
Please create /Pictures/ folder
and store JPEG files in that
Folder. Cannot load the image because Pic-
tures folder is not found in the in-
serted disc.
Use the appropriate data after reading
“Page
94
”.
Data Read error. Failed to read the data because the
CD-R is damaged or dirty. Or, the
pick-up lens of the DVD drive is
dirty. Try re-reading the data by inserting a clean
CD-R. Clean the pick-up lens with a commer-
cially available cleaning kit for DVD, then try
to reading again.
Pictures folder exists on the CD-R
but no data in JPEG format exists. Use the appropriate data after reading “Page
94
”.
JPEG file is corrupt. The data is damaged or an attempt
was made to set a JPEG image that
was not made to specifications as
the background picture. Use the appropriate data after reading
“Page
94
”.
CAUTION! System detected
improper connection of Park-
ing Brake lead. Please check
your configuration for safety.
Please see Operation Manual
for more information regard-
ing safe operation. Parking brake lead is incorrectly
connected. Confirm once more that their connections are
correct.
Connection failed. The cellular phone
’s Bluetooth wire-
less technology is turned off.
Turn the target phone
’s Bluetooth wireless
technology on.
The cellular phone is paired (con-
nected) with another device. Cancel the pairing (connection) and retry.
Rejection has been received from
the cellular phone. Operate the target phone and accept the con-
nection request from the navigation system.
(Furthermore, check the connection settings
on your cellular phone.)
The target cellular phone can not be
found. Check whether your cellular phone is turned
off and, whether the distance to your cellular
phone is too far.
Registration step has been success-
ful but connection has failed for
some reason. Retry the registration and if a connection still
cannot be established, try connecting using
your cellular phone.
Appendix
En
181
Appendix
Appendix