Pioneer AVIC-Z3 - Manual (Page 50)

1 Touch [Map] in the navigation menu,
then touch [View Mode].
2 Touch the type that you want to set.
= For details, refer to How to Use the Map on
page 38
Setting the Map Color Change
between Day and Night
To improve the visibility of the map during the
evening, you can set the timing for changing
the combination of the map color.
1 Touch [Map] in the navigation menu.
2 Touch [Day/Night Display] to change
the setting.
Each time you touch the key changes that set-
ting.
[
Automatic]*:
You can change the colors of a map between
daytime and nighttime according to whether
the vehicle lights are On or Off.
[
Day]:
The map is always displayed with daytime col-
ors.
p To use this function with [Automatic], the
Orange/white lead of the navigation system
must be connected correctly.
p You can also change the brightness of the
screen between daytime and nighttime with
[
Dimmer].
= For details, refer to Operating the picture
adjustment on page 153
Changing the Setting of
Navigation Interruption
Screen
Set whether to automatically switch to the na-
vigation screen from the AV screen when your
vehicle approaches a guidance point such as
an intersection while displaying a screen other
than navigation.
1 Touch [Map] in the navigation menu.
2 Touch [AV Guide Mode] to change the
setting.
Each time you touch the key changes that set-
ting.
[
On]*:
Switches from the audio operation screen to
the navigation screen.
[
Off]:
Does not switch the screen.
Changing the Map Color
You can set the map color to bluish or reddish.
1 Touch [Map] in the navigation menu.
2 Touch [Road Color] to change the set-
ting.
Each time you touch the key changes that set-
ting.
[
Blue]:
Changes to blue based map colors.
[
Red]*:
Changes to red based map colors.
p Check the color change with [Map
Legend].
Modifying Map Configurations
En
50
Chapter
05