Pioneer AVIC-Z3 - Manual (Page 46)

CAUTION
For safety reasons, you cannot use some of these
navigation functions while your vehicle is in mo-
tion. To enable these functions, you must stop in
a safe place and apply the parking brake (refer to
To ensure safe driving on page 22).
Entering the Map Menu
1 Press MENU button to display the navi-
gation menu.
2 Touch [Map] to display the Map menu.
3 Change the setting.
= For more details about “Adjusting each
item
”, refer to Chapter 5
p This section describes the details of the set-
ting for each item. Settings marked with an
asterisk (*) show that these are default or
factory settings.
Setting the Item on the
Map Screen
1 Touch [Map] in the navigation menu,
then touch [Displayed Info].
The Displayed Info screen appears.
On this screen, you can operate the following
items.
2 To finish the setting, touch [OK].
Close Up View
You can select the method to display the close
up view of the intersection.
! [2D]*:
Displays the close up view with the 2D map.
! [3D]:
Displays the close up view with [ Driver
’s
View].
! [Off]:
Does not display the close up view.
City Map
You can select whether to display the city map
when in certain metropolitan city areas.
! [On]*:
Automatically switches to the city map
when in a city map area.
! [Off]:
Does not show the city map.
p Even if you switch [City Map] to [On],
city map cannot display in areas where
there is no city map data.
Tracking Display
You can trace locations that you have already
passed with white dots on the route.
! [On (Always)]:
Displays tracking for all journeys.
! [On (This journey)]:
Displays tracking dots but erases them
when the navigation system is turned off
(when turning off the engine of your vehi-
cle).
! [Off]*:
Does not display tracking dots.
Show Mute Button
Selects whether to display or hide the voice
guidance mute key on the map.
Modifying Map Configurations
En
46
Chapter
05