Pioneer AVIC-Z3 - Manual (Page 178)

No sounds are heard.
The volume level will not rise.
Cables are not connected correctly. Connect the cables correctly.
The system is performing still, slow
motion, or frame-by-frame playback
with DVD-video. There is no sound during still, slow motion, or
frame-by-frame playback with DVD-video.
The system is paused or performing,
fast rewind or forward during the
MP3 disc playback. For an MP3, there is no sound on fast rewind
or forward.
“DTS” is selected for the DVD-Video
disc sound track.
Switch to a non
“DTS” sound track.
The icon is displayed, and op-
eration is not possible.
The operation is not compatible
with the DVD
’s configuration.
This operation is not possible. (For example,
the DVD playing does not feature that angle,
audio system, subtitle language, etc.)
The picture stops (pauses) and
the unit cannot be operated. Reading of data has become impos-
sible during DVD playback. After touching g once, start playback once
more.
The picture is stretched, the as-
pect is incorrect. The aspect setting is incorrect for
the display. Select the appropriate setting for that image.
(Page 149, Page 148)
A parental lock message is dis-
played and DVD playback is not
possible. Parental lock is on. Turn parental lock off or change the level.
(Page 148)
Parental lock for DVD playback
cannot be canceled. The code number is incorrect. Input the correct code number. (Page 148)
Playback is not with the audio
language and subtitle language
settings selected in [
DVD-V
Setup].
The DVD playing does not feature
dialog or subtitles in the language
selected in [
DVD-V Setup].
Switching to a selected language is not possi-
ble if the language selected in [
DVD-V
Setup] is not recorded on the disc.
Dialing is not possible because
the touch panel keys for dialing
are inactive. Your phone is out of range for ser-
vice. Retry after entering within range for service.
The connection between cellular
phone and the Bluetooth unit (sold
separately) (navigation system) can-
not be established now. Perform the connection process.
The cellular phone is not registered
to the navigation system yet. To use the cellular phone featuring the Blue-
tooth wireless technology with this navigation
system, the registration process is necessary.
When the screen is frozen...
Park your vehicle in a safe place, and cut off
the engine. Turn the ignition key back to
“Acc
off
”. Then start the engine again, and turn the
power to the navigation system back on. If this
does not solve the problem, press
RESET but-
ton on the navigation system.
Appendix
En
178
Appendix