Pioneer AVIC-Z3 - Manual (Page 77)

Hands-free Phoning Overview
CAUTION
For your safety, avoid talking on the phone as
much as possible while driving.
If your cellular phone features Bluetooth
®
technology, this navigation system can be con-
nected to your cellular phone wirelessly. Using
this hands-free function, you can operate the
navigation system to make or receive phone
calls. You can also transfer the phone book
data stored in your cellular phone to the navi-
gation system. This section describes how to
set up a Bluetooth connection and how to op-
erate a cellular phone featuring Bluetooth
technology on the navigation system.
The following description assumes that the de-
vice name of the cellular phone to be con-
nected using Bluetooth wireless technology is
set to [
My mobile phone].
Preparing communication devices
To use the cellular phone featuring Bluetooth
wireless technology on the navigation system,
the Bluetooth unit (ND-BT1) (sold separately)
is required.
Precautions for using a cellular phone
featuring Bluetooth technology
By connecting the Bluetooth unit (sold sepa-
rately), you can use the functions described in
this manual, including hands-free phoning or
phone book transfer. To use these functions,
the cellular phone featuring Bluetooth wireless
technology that you want to connect must
have a supported profile that is the same as
the profile for the Bluetooth unit. For the sup-
ported profile, refer to the owner
’s manual of
the Bluetooth unit.
p Please read “Notes for hands-free phoning”
for your reference.
= For details, refer to Notes for hands-free
phoning on page 86
p When the power of the navigation system
turns off, the Bluetooth connection is also
disconnected. When the system restarts,
the system automatically attempts to re-
connect the Previously connected cellular
phone. Even when the connection is cut for
some reason, the system automatically re-
connects the specified cellular phone (ex-
cept when the connection is cut by the
cellular phone operation).
You can open [ Phone Menu] directly by press-
ing and holding MENU button.
p You can check the signal strength for con-
nection between your cellular phone and
Bluetooth unit (sold separately) with [
Con-
nection Status] in [Hardware] Menu.
= For more details about “[Connection
Status]
”, refer to Checking the connections
of leads and installation positions on page
90
p You can set the voice volume and ring vo-
lume with [ Volume] in [Settings] Menu.
= For more details about “Volume”, refer
to Setting the Volume for Guidance and
Phone on page 88
= For more details about “[Volume]”, refer
to Setting the Volume for Guidance and
Phone on page 88
p You can set to mute peripheral sounds dur-
ing hands-free phoning.
= For more details about “[Mute Set]”,
refer to Switching the muting/attenuation
timing on page 150
While your cellular phone featuring Bluetooth
wireless technology is connected,
is dis-
played on the map.
Using Hands-free Phoning
En
77
Chapter
10
Using
Hands-free
Phoning