Pioneer AVIC-Z3 - Manual (Page 32)

= For details, refer to Editing Waypoints on
page 36
9 Touch [OK] to decide your route.
Checking and modifying the route
You can check the route details. You can also
recalculate the route in different conditions.
Route confirmation screen
4
5
6
7
8
9
3 2 1
1 Route calculation condition
Shows the route has been calculated under
those conditions.
! shows that fastest route is prioritized.
! shows that shortest route is priori-
tized.
! shows that using highways and main
roads are prioritized.
! shows whether the suggested
route includes freeways.
!
shows whether the suggested
route includes toll roads. The current
setting appears.
! shows whether the suggested
route includes ferries. The current set-
ting appears.
! shows whether the suggested
route includes learning routes. The cur-
rent setting appears.
In addition, if the calculated route has unin-
tended results, the following icons will be
shown.
! shows that freeways could not be
avoided.
! shows that toll roads could not be
avoided when the setting [ Avoid Toll
Road] is [On].
! shows that ferries could not be
avoided when the setting [ Avoid Ferry]
is [ On].
! shows for routes that contain streets
or bridges that are subject to traffic reg-
ulations during a certain time when the
setting [
Time restrictions] is [On].
2 Distance to the destination
3 Travel time to destination
4 Set the displayed route
Sets the displayed route as your route, and
starts the route guidance.
= For details, refer to When the route guidance
starts on the next page
5 Display multiple routes
You can select a desired route from multiple
route options. Calculated routes are shown in
different colors.
Touching to switch to another route.
Touching [ OK] returns to the previous display.
If you set waypoints, you cannot use the multi-
ple route option.
p There can be cases that the same route
is displayed even when multiple routes
are searched.
p In multiple route calculations, both
routes that use and avoid the freeways
are calculated independently of the set-
ting for [
Avoid Freeway].
6 Change the route calculation condition
Modify each calculation condition, and recal-
culate the route.
= For details, refer to Modifying the Route Cal-
culation Conditions on page 34
7 View the route profile
Basic Operation
En
32
Chapter
03