Pioneer AVIC-Z3 - Manual (Page 51)

CAUTION
For safety reasons, these route-setting functions
are not available while your vehicle is in motion.
To enable these functions, you must stop in a
safe place and put on the parking brake before
setting your route (refer to To ensure safe driving
on page 22).
p Some information on traffic regulations de-
pends on the time when the route calcula-
tion is performed. Thus, the information
may not correspond with a certain traffic
regulation when your vehicle actually
passes the location. Also, the information
on the traffic regulations provided will be
for a passenger vehicle, and not for a truck
or other delivery vehicles. Always follow the
actual traffic regulations when driving.
Searching for Points of
Interest (POI) Statewide
Information about various facilities (Points Of
Interest - POI), such as gas stations, amuse-
ment parks, or restaurants, is available. By en-
tering the POI Name, you can search for a
POI.
p You can also narrow down the search
range by initially specifying the name of the
city where your destination is located and
also by initially specifying the category.
p Use the functions [POI Search] and [Vici-
nity Search] in different situations. In [POI
Search], the distance is not limited within
the selected state or province, but in [
Vici-
nity Search], the distance for the search is
limited to within a 16 km (10 miles) radius.
The following three methods are available for
searching facilities by POI:
! Searching for POIs by specifying a category
first
! Searching for POIs by specifying a city name
first
! Searching for a POI directly from the name of
the facilities
Searching for a POI directly
from the name of the facilities
1 Touch [Destination] in the navigation
menu, and then touch [POI Search].
2 Touch the state code key of the destina-
tion and select the state or province (or ter-
ritory).
= For more details about “Selecting the state
or province where you want to search
”, refer to
Calculating your destination by using Address
Search on page 28
3 Input the name of the facilities.
[ City]:
Touch to specify the destination city or area,
and then input the city name. (This is available
only when [
Name] is blank.)
[ Category]:
Touch to specify the POI category. (This is
available only when [
Name] and [City] are
blank.)
[
List]:
Lists candidates based on the yellow charac-
ters in the text box (suggested characters in
white are invalid). Touch the desired facility in
the list to proceed to the next step.
p When the options are narrowed down to six
or less, a list of the matching facilities auto-
matically appears. When you enter the
same characters that were entered pre-
viously, the system automatically displays
the character string that follows the entered
characters. (Auto fill-in function)
= For details, refer to Auto fill-in function
on page 30
p If less than six POIs in a detailed category
are available, the screen for inputting the
POI name is skipped.
Setting a Route to Your Destination
En
51
Chapter
06
Setting
a
Route
to
Y
our
Destination