Pioneer AVIC-Z3 - Manual (Page 123)

Operating the XM Satellite
Radio
You can use the navigation system to control
an XM satellite digital tuner, which is sold se-
parately.
For details concerning operation, refer to the
XM tuner
’s operation manuals. This section
provides information on XM operations with
the navigation system which differs from that
described in the XM tuner
’s operation man-
ual.
Selecting [XM] as the source
% Touch the source icon and touch [XM].
= For details, refer to Selecting a source on
page 97
Screen configuration
GEX-P10XMT, GEX-P920XM
All CH Mode
1 2 34 6
8
5
7
Category Mode
9
GEX-P910XM, GEX-P900XM
1 2 3
8
5
7
About the logo for channel name
Only the logo data that is contained in the na-
vigation system can be displayed for each
channel. The logo of a newly established chan-
nel that is not contained cannot be displayed.
When no logo can be displayed, the following
substitute icon is displayed.
Substitute icon
1 Source icon
Shows which source has been selected.
2 XM band indicator
Shows the XM band which has been selected.
3 XM channel number indicator
Shows XM channel number the tuner is cur-
rently tuned to.
4 XM station name indicator
Shows XM broadcast station name the tuner
is currently tuned to.
5 XM channel select mode indicator
Shows what channel select mode has been
selected. You can select a channel from all
channels in
All CH Mode, and select a chan-
nel from selected category in
Category Mode.
= For details, refer to Touch panel key opera-
tion on the next page
6 XM channel category
Shows the category of broadcast channel.
7 XM station name logo
p The message “-ON THE AIR-” disap-
pears if the navigation system cannot re-
ceive XM tuner reception for some
reason.
Using the AV Source (XM, SIRIUS)
En
123
Chapter
14
Using
the
A
V
Source
(XM,
SIRIUS)