Pioneer AVIC-Z3 - Manual (Page 182)

Registration failed.
The cellular phone ’s Bluetooth wire-
less technology is turned off during
the registration step.
Keep turning the target phone ’s Bluetooth
wireless technology on during the registra-
tion.
Rejection by the cellular phone has
received. Operate the target phone and accept the re-
gistration request from the navigation system.
(Furthermore, check the connection settings
on your cellular phone.)
Registration step has failed for
some reason. Retry the registration and if the registration
still fails, try registering using your cellular
phone.
Automatic connection in pro-
gress. Please try again later. If you try to perform another opera-
tion during automatic connection
by the system. ! Wait for a while and retry.
! Establish that connection temporarily and
retry that later.
Automatic connection in pro-
gress. Please try manually
later. If you try to connect another phone
during automatic connection by the
system. Establish that connection temporarily and
retry it later.
Could not find any available
phone. No available phone exists in the sur-
roundings when the system
searches for the cellular phone fea-
turing Bluetooth wireless technol-
ogy for registration. ! Turn the target phone’s Bluetooth wireless
technology on.
! Check whether your cellular phone is
turned off and, whether the distance to your
cellular phone is too far.
Bluetooth unit error. It is not
possible to find any cell
phones. If the Bluetooth unit (sold sepa-
rately) is disconnected from this na-
vigation system or Bluetooth unit
carries out another processing
when the system search the cellular
phone featuring Bluetooth wireless
technology for registration. ! Check the connection and retry.
! Establish that connection temporarily and
retry later.
Bluetooth unit error. The de-
vice name could not be set. If the Bluetooth unit (sold sepa-
rately) is disconnected from this na-
vigation system or the Bluetooth
unit carries out another process
when you change the device name. ! Check the connection and retry.
! Establish that connection temporarily and
retry later.
Registration is not available. If you try to perform another opera-
tion immediately after connection
failure. Wait for a while and retry.
Reading failed. If you transferred the data from your
cellular phone in a format can not
be received with navigation system. Select just a suitable item, format, and then
retry.
Disconnection has been made dur-
ing transfer for some reason. Connect your cellular phone again and retry.
Calibration failed. Please refer
to the owner
’s manual.
The touch panel calibration has not
been carried out with appropriate
steps. Please read the instruction of touch panel ca-
libration and retry. (Page 190)
The HDD is not connected. Failure of the built-in hard disk drive
has occurred, such as internal elec-
trical problem or file system error. Consult your dealer.
Cannot use HDD. Failure of the built-in hard disk drive
has occurred, such as internal elec-
trical problem or file system error. Consult your dealer.
Appendix
En
182
Appendix