Chapter 9, 145 cosm amp chapter 9 parameters guide, Bass amp modern – Roland VG-99 User Manual

Page 145

Advertising
background image

145

COSM AMP Chapter 9 Parameters Guide

Chapter 9

BASS AMP MODERN

Parameter/
Range

Explanation

GAIN

0–100

Adjusts the distortion of the amp.

BASS

-50–+50

Adjusts the tone for the low frequency
range.

MIDDLE

-50–+50

Adjusts the tone for the middle frequency
range.

MIDDLE FREQ (Middle Frequency)

220Hz, 800Hz, 3.0kHz This control adjusts the center frequency of

the frequency range adjusted with the Mid-
dle control.

TREBLE

-50–+50

Adjusts the tone for the high frequency
range.

LEVEL

0–100

Adjusts the volume of the entire preamp.

* Be careful not to raise the Level setting too

high.

ENHANCER

0–100

This controls the clarity and presence of the
sound.

SP TYPE (Speaker Type)

Select the speaker type.

OFF

This turns off the speaker simulator.

ORIG

This is the built-in speaker of the amp you
selected with PREAMP TYPE.

1x15”

Models the Trace Elliot 1518.

1x18”

Models the SWR Big Ben.

2x15”

Models the Acoustic 402.

4x10”

Models the SWR Goliath.

8x10”

Models the Ampeg 810E.

MIC POS (Mic Position)

This simulates the microphone position.

CENTER

Simulates the condition that the micro-
phone is set in the middle of the speaker
cone.

1–10cm

Simulates the condition that the micro-
phone is moved away from the center of the
speaker cone.

MIC LEVEL

0–100

Adjusts the volume of the microphone.

DIRECT LEVEL

0–100

Adjusts the volume of the direct sound.

VG-99_e.book 145 ページ 2007年7月5日 木曜日 午前9時22分

Advertising