Roland CD-2 - Manual (Page 16)

16
Panel Descriptions (continued)
Introduction
POWER Switch
This turns the power on/off.
Page 24, “Turning the Power On/Off”
AC Adaptor Jack
Connect the included AC adaptor to this jack.
Page 20, “Connecting Other Equipment”
Cord Hook
Wrap the AC power adaptor cord around this hook to
prevent the cord from being accidentally unplugged.
Page 21, “Caution when making connections: AC
Adaptor Jack”
FOOT SW (Foot Switch) Jack
You can connect a foot switch (such as the Roland DP-2 or
BOSS FS-5U; separately available) to this jack. Use it to
play back, record, or assign track numbers.
Page 20, “Connecting Other Equipment”
Page 76, “Specifying the Function of the Foot Switch”
MIDI OUT Connector
This connector transmits MIDI messages.
●
If you want to play back SMF (Standard MIDI File)
data, connect this jack to the MIDI IN connector of
your external sound generating device.
Page 73, “Playing SMF (Standard MIDI File) Data”
AUX OUT Jacks
Use these jacks to output analog audio signals to an
external speaker system or electronic piano.
Page 20, “Connecting Other Equipment”
You can choose the type of audio signal that is sent from
the AUX OUT jacks.
Page 77, “Choosing the Audio Source that is Output
from the AUX OUT Jacks”
LINE IN Jacks
You can connect your electronic piano or keyboard to
these jacks, and record your performance.
Page 20, “Connecting Other Equipment”
LEVEL Knob
This knob adjusts the input level of the LINE IN jacks.
Page 38, “Adjusting the Input Level”
Rear Panel
CD-2.e.book 16 ページ ２００５年２月２０日 日曜日 午後４時２８分