Roland CD-2 - Manual (Page 75)

75
More Functions
More Functions
Other Functions and Settings
You can switch the display to show either elapsed time or
remaining time during playback and recording.
When you press from the main screen, the time display
will change as follows.
■ While recording or in recording-standby
mode
■ While playing or stopped
You can also switch the time display as follows.
1
Press until “Time Display” appears in
the display, and then press .
• You can also select this item by turning [DATA].
The following screen appears.
2
Turn to select the time display that
will appear in the screen.
Elapse: During playback, the track’s elapsed
playback time is displayed.
During recording-standby/recording, the
track’s elapsed recording time is displayed.
Remain: During playback, the track’s remaining
playback time is displayed.
During recording-standby/recording, the
remaining recording time on the CF card or
CD-R/RW disc is displayed.
3
Press twice.
You’re returned to the previous readout.
Displaying the Remaining Time
Elapsed recording time
Remaining recording time on the entire
CF card or CD-R/RW disc
Elapsed track playback time
Remaining track playback time
Restoring the Factory Settings (Initialize) / Other Functions and Settings
CD-2.e.book 75 ページ ２００５年２月２０日 日曜日 午後４時２８分