Roland CD-2 - Manual (Page 74)

74
More Functions
Restoring the Factory Settings (Initialize)
When you execute the Initialize operation, all settings will
revert to their factory settings. If the CD-2 does not operate as
you expect even when you follow the steps in this manual,
you may wish to execute the Initialize operation.
The table on the right shows the factory settings.
1
Press until “INITIALIZE” appears in
the display.
• You can also select this item by turning [DATA].
2
Press .
The message “Are You Sure?” appears.
3
To execute the Initialize operation, press
.
(If you decide to cancel, press .)
The Initialize operation is executed.
When initialization has been completed, you’re
returned to the original readout.
Function
Parameter Name/
Button Name
Initial Value
Pitch Pitch 0
Key Key 0
Speed Speed 0
Center Cancel [CENTER CANCEL] Off
Menu LCD Contrast 5
SYSTEM
Time Display Elapse
Show Track Title Off
Foot Switch Play
MIC
Int MIC Auto Lvl On
Int MIC Gain 25
Int MIC Bal C
RECORDING
Ext MIC1/2 Pan C/C
CF Rec Mode Standard
Auto Rec Start Off
Auto Marker Off
Auto Marker Time 5min
Auto Marker Lvl -60dB
METRONOME
Sound Bell
Tempo 120
Beat 4
Count-in (Beat) Off
AUIDO
LINE IN On
CF Mix Level 0
CD Mix Level 0
AUX OUT Select Mix
AUX OUT Level Fixed
Tuner
Pitch 440
Tone A4
Effect Effect Patch Off
Mastering Effect Mastering Effect Off
Mic select [MIC SELECT] Off (Unlit)
Mute [SPEAKER MUTE] Off (Unlit)
Repeat REPEAT [1/ALL] Off
REPEAT [A-B] Off
CD-2.e.book 74 ページ ２００５年２月２０日 日曜日 午後４時２８分