Roland CD-2 - Manual (Page 27)

27
Getting Started
Getting Started
Inserting/Removing a CF Card
1
Insert the CF card into the CF card slot.
Carefully insert the CF card all the way in—until it is
firmly in place.
• If the CF card cannot be used in its current state
by the CD-2
The message “Not CD-2 Format. Format?” appears.
In order to use this CF card with the CD-2, you will
need to format it.
Page 36, “Preparing a CF card for use”
• If the CF card has already been formatted
When the CD-2 recognizes the CF card, “CF” is
indicated as the source name.
In the case of a previously recorded CF card, the
total number of songs and the total playback time
will be displayed when this information has been
read from the CF card.
NOTE
• The CD-2’s power must be turned off before removing a
CF card. Keep the CF card inserted while the CD-2’s
power is turned on.
If a CF card is removed while the CD-2’s power is on, the
data in the CF card may be destroyed, or the CF card
may become unusable.
1
Switch off the CD-2’s power.
Page 24, “Turning the Power Off”
2
Press the card eject button located at the
right of the CF card slot.
The card eject button pops out.
3
Press the card eject button once again.
• Press the button in until you hear a click.
The CF card pops out slightly.
4
Grasp the CF card and pull it straight out.
NOTE
• The card eject button may be damaged if you leave it in
the outward position; be sure to push it back in.
Inserting a CF Card
CF card slot
Source name
Total number of tracks Total playback time
Removing a CF Card
Card eject button
Inserting/Removing a CD
/
Inserting/Removing a CF Card
CD-2.e.book 27 ページ ２００５年２月２０日 日曜日 午後４時２８分