Roland CD-2 - Manual (Page 59)

59
More Functions
You can assign a title of up to 250 characters to each track on
a CF card.
MEMO
• Track titles such as “SNG01_00 ➔ SNG02_00 ➔ ...
SNG99_00” are automatically assigned to each track.
• Track title display
You can show the track titles in the screen. If you’ve
switched the title display setting “On,” the title will
appear on screen when you switch tracks. Few seconds
later, the screen returns to the time display.
Page 78,
“Viewing the Track Titles on a CF Card”
1
Use or to select the track to which
you want to assign a title.
2
Press until “RENAME” appears in the
display.
3
Press .
The title entry screen appears.
4
Enter the title. See “Entering characters”
in the next column.
5
To confirm the title you’ve entered,
press
.
(If you decide to cancel, press .)
The title you specified is assigned to the track, and then
you’re returned to the original readout.
■ Entering characters
Characters are entered at the location of the cursor. Move
the cursor and enter the desired characters.
• You can enter the following characters.
As you turn [DATA] clockwise, the characters will
appear in the order of A
➔ B ➔ ... Z ➔ [ ➔ ...
Turning [DATA] counterclockwise will cause the
characters to appear in the opposite order.
* A blank space or a “.” (period) cannot be used as the
first character of a title. If you try to do so, the CD-2
will delete the first character automatically and use
the subsequent characters for the track title.
■
If you rename the file on your computer
The tracks are stored in the root directory of the CF card.
The files with an extension of “.WAV” and “.DAT” are
the track files.
The CD-2 uses the filename as the track name. You can
change the title by renaming the file. This will change the
order of the tracks on the CF card. Tracks you rename
will move to a location following the last track.
NOTE
• You must not change the filename extension of
“.WAV” or “.DAT”.
• We cannot guarantee that the CD-2 will operate
correctly if you manipulate any directories or files
with extensions other than “.WAV” or “.DAT”.
• Don’t use double-byte characters (e.g., Japanese) or “~”
(tilde) in the filename; the CD-2 is unable to recognize
them.
• The filename must be 250 characters or fewer (not
including the filename extension).
Assigning a Title to a Track
Track number assigned
when recording.
If there are two or more tracks with
the same title, a two-digit number
is appended to distinguish them.
Number of the track you’re editing
Track title
Cursor (blinking)
To move
the cursor
Press or
The cursor will move backward or
forward.
To choose
a character
Turn
To insert a
space
Press
A space (blank) is inserted at the cursor.
Choose the desired character.
To delete a
character
Press
The character at the cursor is deleted.
Subsequent characters will move forward.
Editing a CF Card
CD-2.e.book 59 ページ ２００５年２月２０日 日曜日 午後４時２８分