Specifying the function of the foot switch, In step 2 of “specifying the function of the foot – Roland CD-2 User Manual

Page 76

Advertising
background image

76

Other Functions and Settings (continued)

More Functions

You can use a separately sold foot switch (such as the Roland
DP-2 or BOSS FS-5U) to perform the following functions.

• Start/pause track playback

• Assign track numbers (only during recording)

You can choose one of the above functions for the foot switch
to control.

MEMO

• Connect the foot switch to the FOOT SW jack located on

the rear panel of the CD-2.

Page 20, “Connecting

Other Equipment”

1

Press

until “Foot Switch” appears in

the display, and then press

.

• You can also select this item by turning [DATA].

The following screen appears.

2

Turn

to choose the function of the

foot switch.

Play:

Performs the same function as

.

Alternately start or pause playback each
time you press the foot switch.

When in recording-standby mode,
alternately start or pause recording each
time you press the foot switch.

Marker:

Performs the same function as

during

recording.

A track number will be assigned at the time
location where you press the foot switch
during recording.

Page 55, “Using [MARKER] to assign

track numbers”

3

Press twice.

You’re returned to the previous readout.

Auto Level Control is a function that automatically adjusts the
input level according to the loudness of the audio source
when you record via the internal mics.

It is convenient to use Auto Level Control when you’re
recording material that consists mainly of speaking voices,
such as a lecture.

• When the CD-2 is shipped from the factory, Auto Level

Control is turned “On.”

1

Press

until “Int MIC Auto Lvl” appears

in the display, and then press

.

• You can also select this item by turning [DATA].

The following screen appears.

2

Turn

to select “On.”

3

Press

twice.

You’re returned to the previous readout.

MEMO

• If you want the recording to retain the original ambience

of the room, turn Auto Level Control “Off” in Step 2.
Then, adjust the internal mic input level manually.

Page 37, “Adjusting the Input Level: Internal Mic”

Specifying the Function of the
Foot Switch

Automatically Adjusting the
Input Level of the Internal Mics
(Auto Level Control)

CD-2.e.book 76 ページ 2005年2月20日 日曜日 午後4時28分

Advertising