Roland CD-2 - Manual (Page 35)

35
Recording to CF/CD
4
Preparing the CF Card
Press on the CF card side.
The CF card is selected as the source.
Press or to select the track
that you want to play back.
Adjust the playback level of the music
CD.
Page 38, “Temporarily Adjusting the Playback
Level of a Music CD or CF Card”
If necessary, you can also adjust the input level of
the mic or guitar so that the overall balance is
appropriate (Step 3-
).
5
Repeatedly press until “CF → CF”
appears in the display.
Now you are ready for overdubbing.
MEMO
• Canceling overdubbing
To cancel overdubbing, repeatedly press
[OVERDUBBING] until its indicator goes out.
You can also cancel overdubbing by pressing on the
CF card side.
6
On the CF card side, press .
Recording begins. While you listen to the playback of
the track you selected in Step 4, perform your
additional vocal or instrumental part to record it.
• If you’re overdubbing with a song from a CF card,
the upper right of the screen will indicate
“CF
→ CF.”
7
When you’re finished recording,
press on the CF card side.
The newly recorded track is added at the end of the CF
card. Play back the last track (
Page 44) to hear the
result of your overdubbing.
1
2
3
4
CF track number
you’re playing back CF track number
you’re recording
Layering Your Performance with a Song from a CF Card (Overdubbing)
CD-2.e.book 35 ページ ２００５年２月２０日 日曜日 午後４時２８分