Roland CD-2 - Manual (Page 87)

87
Reference
Reference
Messages
If a message is displayed, refer to the following list and take the appropriate action.
Message Content Action
Blank Disc The disc is blank (empty). Use a CD-R/RW disc that is not blank.
CD Disc Busy The disc could not be read/written in time. If this appears during playback, use an
unscratched disc. If this appears during
recording, use a recommended brand of disc.
CD Disc Full The disc is full. No more tracks can be recorded. Record on another disc. Delete unwanted tracks
to increase the free space (CD-RW disc).
CD Track Full You have reached the maximum number of tracks
(99) that can be recorded on a disc. No more tracks
can be recorded. Record on another disc.Delete unwanted tracks to
increase the free space (CD-RW disc).
CD Read Failed Failed to read a disc. Use a disc that is not scratched.
CD Write Failed Failed to write a disc. Use a recommended brand of disc.
CF Can’t Format Failed to format the card. Use a different card.
CF Card Full The card is full. No more tracks can be recorded. Delete unwanted tracks to increase the free space.
CF No Enough Mem The card does not have enough free space for the
operation. Delete unwanted tracks to increase the free space.
CF Track Full You have reached the maximum number of tracks
(99) that can be recorded on a CF card. No more
tracks can be recorded. Delete unwanted tracks to increase the free space.
CF Was Removed The CF card was removed while reading or writing. Keep the CF card inserted while the power is
turned on.
Count-in REC Recording will begin after a count-in. —
Divide Multiple The track will be divided for writing on multiple
discs. —
Finalized Disc The disc has been finalized. Use an unfinalized CD-R/RW disc.
Improper Disc The disc is an inappropriate type for the operation
you are attempting to perform. Use a disc that is appropriate for the operation.
Not A CD-RW The disc is not a CD-RW disc. Use a CD-RW disc.
No Title No title has been entered. Assign a title of one character or more.
Not SMF Disc The disc cannot be played back by the SMF player
function. Use a disc that contains SMF files.
REC Too Short You can’t stop recording because the elapsed
recording time has not reached four seconds.
The track number can’t be assigned because the
location selected is less than four seconds after the
previous track number.
Each recording must be longer than four seconds.
Assign track numbers at intervals of four seconds
or greater.
SMF Too Big The SMF file exceeds the size (1 MB) that the CD-2
can play. Playback is not possible. Use an SMF file that the CD-2 is able to play.
Short Of Capa You can’t assign a CF track that exceeds the
available CD-R/RW disc space. Either use another disc, or assign a smaller CF
track.
Tr is Too Short You can’t trim or divide because a track can’t be
shorter than four seconds. —
Unsupported CF The CD-2 is unable to use this CF card. Use a different card.
Unsupported File The CD-2 is unable to play this SMF file. The CD-2 can play only Format 0 SMF files.
Waiting Signal.. Waiting for audio input to trigger recording. To begin recording, input an audio signal.
Messages
CD-2.e.book 87 ページ ２００５年２月２０日 日曜日 午後４時２８分