Roland CD-2 - Manual (Page 62)

62
Editing a CF Card (continued)
More Functions
MEMO
• Tracks that follow the location of the division will be
placed at the end of the CF card.
• If the CF card does not have enough remaining free
space, you won’t be able to execute the Divide operation.
• You can’t edit a track that is shorter than eight seconds.
1
Use or to select the track you
want to divide.
2
Press until “DIVIDE” appears in the
display.
3
Press .
The divide editing screen appears.
4
On the CF card side, press .
The track will begin playing.
5
Press at the approximate location
where you want to divide the
track.
Four seconds of sound preceding this location will
play repeatedly.
6
Turn to adjust the precise
location at which you want
to divide the track.
7
Press .
The message “Are You Sure?” appears.
8
To divide the track, press .
(If you decide to cancel, press .)
The track will be divided. When the operation is
completed, you’re returned to the original readout.
The new track is created at the end of the CF card. Play
back the last track (
Page 44) to hear the result.
Preparations
common to all
CF card editing
operations Insert the CF card that you want
to edit.
Press the CF card button to
select the CF card as the source.
Dividing a Track (Divide)
1
2
1 2
1 2 3
The contents of the CF card will change as follows.
Track number
Track number
Divide
A B
A’ A” B
Number of the track you’re editing
CD-2.e.book 62 ページ ２００５年２月２０日 日曜日 午後４時２８分