Save as smf, Import wav/aiff, Factory reset – Roland MC-909 User Manual
Page 132: User backup, User restore, Tern in smf format (p. 132), Wav/aiff file (p. 132), P. 132), Card (p. 132), 132 utility
132
Utility
Save As SMF
Here’s how to write the data of the current pattern to user memory
or memory card as SMF data.
Format 1 SMF data will be created.
1.
In Pattern mode, select the pattern that you want to
save as SMF data.
2.
In the Utility menu screen, press [F2 (Save As SMF)].
3.
Select the destination in which the SMF data is to be
saved.
For details on the selection procedure, refer to “Import SMF” (p.
131).
4.
Press [F6 (Save As SMF)].
A message will ask you for confirmation.
5.
To save the data, press [F6 (Execute)].
*
To cancel, press [F5 (Cancel)].
Import WAV/AIFF
Here’s how to import a sample file (WAV/AIFF) as a user sample.
1.
In the Utility screen, press [F3 (Import WAV/AIF)].
2.
Select the sample that you want to import.
*1: If not even check mark is assigned, the operation will be
executed on the file selected by the cursor.
3.
Press [F6 (Import)].
A message will ask you for confirmation.
4.
To import the sample, press [F6 (Execute)].
The data will be loaded into a user sample.
*
To cancel, press [F5 (Cancel)].
Factory Reset
You can restore the settings of the MC-909 to their factory-set
condition.
User Backup
Here’s how all user data in the user area can be saved on a memory
card.
The following user data will be saved.
• User Patterns
• User Patches
• User Rhythm sets
• Songs
• Samples
• Pattern sets
• RPS sets
• Arpeggio styles
• Chord forms
• System settings
In order to execute User Backup, the memory card must have
approximately 16 MB or more free area.
1.
Insert a memory card into the slot.
2.
In the Utility screen, press [F5 (User Backup)].
A message will ask you for confirmation.
3.
To execute the backup, press [F6 (Execute)].
*
To cancel, press [F5 (Cancel)].
User Restore
Here’s how user data saved on a memory card by the User Backup
operation can be reloaded back into the user memory of the MC-909.
When you execute User Restore, the current contents of the user area
will be completely erased.
1.
Into the slot, insert the memory card on which user
data has been saved.
2.
In the Utility screen, press [F6 (User Restore)].
A message will ask you for confirmation.
3.
To proceed with the restoration, press [F6 (Execute)].
*
To cancel, press [F5 (Cancel)].
[CURSOR (right)]
Display the contents of a folder.
[CURSOR (left)]
Return to the folder above.
[VALUE] [INC/DEC]
[CURSOR (up/down)]
Move the cursor upward or downward.
[F1 (User)]
Display the contents of the user area.
[F2 (Card)]
Display the contents of the memory card.
[F3 (Mark Clear)]
Remove the check mark from the file.
[F4 (Mark Set)]
Add a check mark to the file.
[F5 (Cancel)]
Return to the previous screen.
[F6 (Import)]
Import the checked files. (*1)
[SHIFT] +
[F3 (Mark Clear All)]
Clear the check marks from all files in the
folder.
[SHIFT] +
[F4 (Mark Set All)]
Add a check mark to all files in the folder.
MC-909_Ref_e.book 132 ページ ２００５年３月１日 火曜日 午後３時２９分