Roland MC-909 - Manual (Page 88)

88
Effects
Here you can apply special effects to the sound.
Effect on/off
Use the ON/OFF buttons of the Effects section to switch each effect
on/off.
fig.4-01
[COMP]: Compressor
[MFX 1]: Multi-effects 1
[MFX 2]: Multi-effects 2
[REVERB]: Reverb
Effect settings
1. In the top screen of each mode, press [F4 (Effects)].
2. Press [F1]–[F5] to select an effect to adjust.
3. Use [CURSOR] to select a parameter.
4. Use [VALUE] or [INC/DEC] to make settings.
Effect connection (Effect Routing)
You can specify the connections independently for each pattern.
The way in which the direct sound is output ( 2 ) and the depth of
reverb ( 3 ) can be set independently for each part.
fig.4-02
[F1 (Routing)] Specify the connections (routing) between
parts, effects, and output destinations.
[F2 (Comp/EQ)] Compressor settings.
[F3 (MFX 1)] Multi-effects 1 settings.
[F4 (MFX 2)] Multi-effects 2 settings.
[F5 (Reverb)] Reverb settings.
Parameter Range Explanation
1.
Part Number
1–16, EXT The part for which you are
making effect settings.
EXT: External input
2.
Part Output
Assign
DRY, MFX1,
MFX2,
COMP, DIR1,
DIR2, RHY How the original sound of
each part will be output
DRY: Output to MIX OUT-
PUT jacks without passing
through effects
MFX1 (2): Output through
multi-effects 1 (or 2)
COMP: Output through the
compressor
DIR1 (2): Output to the DI-
RECT 1 (or DIRECT 2) jacks
without passing through ef-
fects
RHY: Output according to
the settings of the rhythm
set assigned to the part
* “RHY” can be set only
when a rhythm set is as-
signed to the part.
3.
Part Reverb
Send Level
0–127 Depth of reverb applied to
each part
Set this to 0 if you don’t
want to apply reverb.
4.
Comp Output
Assign
(see explana-
tion) Output destination of the
sound processed through the
compressor.
DRY: MIX OUTPUT jacks
MFX1 (2): Multi-effects 1
(or 2 )
5.
Comp Reverb
Send Level
0–127 Depth of reverb applied to the
sound processed through the
compressor
Set this to 0 if you don’t
want to apply reverb.
6.
(MFX Type)
See “Multi-Ef-
fects List” (p.
92) The effect used by multi-ef-
fects 1
* For details on each effect,
refer to “Multi-Effects List”
(p. 92).
1
2
3
4
5
6
7
8
9 10
11
MC-909_Ref_e.book 88 ページ ２００５年３月１日 火曜日 午後３時２９分