Roland MC-909 - Manual (Page 66)

66
Patch Edit
TMT (Tone Mix Table)
These parameters specify how the tones will be combined, and how they will be played.
Porta Start
(Portamento Start) PITCH,
NOTE Portamento begins anew if you press another key during a pitch movement. This setting specifies how
the new portamento starts.
PITCH: The pitch begins changing immediately to the new note’s pitch when its key is pressed.
NOTE: The pitch begins changing to the new note’s pitch only after it has first reached its original pitch
destination.
Portamento Time 0–127 Time over which the next pitch is reached
Unison Switch # OFF, ON Switches the detune effect on/off
If this is “ON,” the sound of the selected patch will be layered (three notes), producing a fatter sound.
* If this is turned “ON,” the Mono/Poly parameter will also be set to “MONO” ([SOLO] will light), and
the selected patch automatically uses single notes.
Unison Fat Level # 0–127 Strength of the detune effect
Increasing this value will cause the pitch of the layered notes to be raised and lowered farther away
from each other (maximum one octave up and down).
Parameter Value Description
Structure Type 1&2
(3&4) 1–10 How tones 1 and 2, or 3 and 4, will be combined
If you press [F6 (Zoom Edit)] while this parameter is selected, the screen will show the way
in which the tones are combined. (Press [EXIT] to return to the previous screen.)
B indicates Booster, and R indicates Ring Modulator.
* If you select Type 2–10 and turn off one of the tones, the other tone will use the conventional
configuration of WG/TVF/TVA.
Booster 1&2 (3&4)
(Booster Gain) 0, +6, +12, +18 dB Depth of the booster effect when “Type” is set to 3 or 4
TMT (Tone Mix Table)
On the MC-909, you can specify how each tone will sound in response to pad playing dynamics (velocity). These parameters are collectively
referred to as the TMT (Tone Mix Table) settings.
Velocity Control
(TMT Velocity
Control) OFF, ON,
RANDOM Specifies whether velocity data will be used (ON) or ignored (OFF)
If you specify RANDOM, the tones will sound randomly, regardless of velocity data.
Parameter Value Description
C5
D4
C4
press D4 key
Pitch
Time
press C4 key
press C5 key
C5
D4
C4
press D4 key
Pitch
Time
press C4 key
press C5 key
1
L.Fade value U.Fade value
Level
Velocity Upper Lower
MC-909_Ref_e.book 66 ページ ２００５年３月１日 火曜日 午後３時２９分