File utility, Initializing a memory card (format), Deleting a file (delete) – Roland MC-909 User Manual
Page 134: Moving a file (move), Copying a file
134
File Utility
Here you can perform file-handling operations.
1.
Press [MENU].
2.
Use [CURSOR (up/down)] to select “File Utility.”
fig.6-05
3.
Press [ENTER].
The File Utility screen will appear.
fig.6-06
4.
Use [F3]–[F6] to select the operation you want to
carry out.
*1: If not even check mark is assigned, the operation will be
executed on the file selected by the cursor.
* About the folder structure, refer to p. 135
Initializing a memory card
(Format)
Here’s how to initialize a memory card.
When you execute the Format operation, the contents of the memory
card will be completely erased.
1.
Press [F3 (Format)].
A message will ask you for confirmation.
2.
To format the card, press [F6 (Execute)].
*
To cancel, press [F5 (Cancel)].
Deleting a file (Delete)
Here’s how you can delete an unwanted file from a folder.
1.
Select the file that you want to delete.
2.
Press [F4 (Delete)].
A message will ask you for confirmation.
3.
To delete the file, press [F6 (Execute)].
*
To cancel, press [F5 (Cancel)].
Moving a file (Move)
Here’s how you can move a file to a different folder.
1.
Select the file that you want to move.
2.
Press [F5 (Move)].
A screen will appear, allowing you to select the folder to which
the file is to be moved.
3.
View the contents of the move-destination folder.
4.
To move the file, press [F6 (Execute)].
*
To cancel, press [F5 (Cancel)].
Copying a file
Here’s how you can copy a file to a different folder.
1.
Select the file that you want to copy.
2.
Press [F6 (Copy)].
A screen will appear, allowing you to select the folder to which
the file is to be copied.
3.
View the contents of the copy-destination folder.
4.
To copy the file, press [F6 (Execute)].
*
To cancel, press [F5 (Cancel)].
[CURSOR (right)]
Display the contents of a folder.
[CURSOR (left)]
Return to the folder above.
[VALUE] [INC/DEC]
[CURSOR (up/down)]
Move the cursor upward or downward.
[F1 (User)]
Display the contents of the user area.
[F2 (Card)]
Display the contents of the memory card.
[F3 (Card Format)]
Format (initialize) a memory card.
[F4 (Mark Clear)]
Remove the check mark from the file.
[F5 (Mark Set)]
Add a check mark to the file.
[F6 (Move)]
Move the checked files to another folder.
(*1)
[SHIFT] +
[F3 (Delete)]
Delete the checked files. (*1)
[SHIFT] +
[F4 (Mark Clear All)]
Clear the check marks from all files in the
folder.
[SHIFT] +
[F5 (Mark Set All)]
Add a check mark to all files in the folder.
[SHIFT] +
[F6 (Copy)]
Copy the checked files to another folder.
(*1)
MC-909_Ref_e.book 134 ページ ２００５年３月１日 火曜日 午後３時２９分