Roland MC-909 - Manual (Page 44)

44
Pattern editing
Extract a Rhythm Instrument
This operation extracts data of a specific note number from the
specified part, and moves it to a different part. You can use this to
divide a rhythm set into separate parts for each instrument.
1. In step 5 on the preceding page, press a part button
[1]–[16] to select the move-source part; the button
will light.
2. Select the note number that you want to move.
3. Press [F6 (Select)].
4. Press a part button [1]–[16] to select the move-
destination part; the button will light.
5. Press [F6 (Execute)].
* To cancel the procedure, press [F5 (Cancel)].
* If the move-source part does not contain any data of the note number
specified by Extract Note, a message of “Cannot Extract!” will appear.
* If the move-destination part contains no performance data, the setup
parameters (p. 26) of the move-source part will be copied.
* If the move-destination part does contain performance data, only the
note data will be moved. This means that the note data will be played
using the sound of the patch selected for the move-destination part.
Pattern Copy
This operation copies data from the current pattern to another
pattern.
1. In step 5 on the preceding page, press a part button
[1]–[16] or [TEMPO/MUTE CONTROL] to select the
move-source part; the button will light.
2. Select the data that you want to copy.
3. Press [F6 (Select)].
4. Press a part button [1]–[16] or [TEMPO/MUTE
CONTROL] to select the move-source part; the
button will light.
5. Press [F6 (Execute)].
* To cancel the procedure, press [F5 (Cancel)].
* You can specify a copy-destination part (Dest Part) only if there is
just one copy-source part. If there are two or more copy-source parts,
they will be copied to the same parts of the copy-destination.
* When copying data from one part to another part within the same
pattern, you can select only one part at a time.
Parameter Range Explanation
Src Part 1–16 Move-source part
Extract Note 0 (C-1)–127 (G9) Note number to be moved
Dest Part 1–16 Move-destination part
Parameter Range Explanation
Event ALL, NOTE,
PROG, CC, BEND,
PAFT, CAFT, SYS-
EX, BPM, MUTE Data to be copied
Note Minimum 0 (C-1)–127 (G9) Note region to be cop-
ied
* This can be specified
only if Event is set to
“NOTE.”
Note Maximum
Min CC#0–CC#127 Control change mes-
sage to be copied
Messages in the
specified range will
be copied
* This can be specified
only if Event is set to
“CC.”
Max
Dest Pattern Preset, User, Card Bank of the copy-desti-
nation pattern
1–650 (Preset)
1–200 (User)
1–999 (Card) Copy-destination pat-
tern number
Dest Meas 1–(last measure + 1) First measure of the
copy-destination
Dest Part 1–16 Copy-destination part
Copy Mode REPLACE, MIX How the copy will oc-
cur
REPLACE: The
copy-destination
data will be replaced
by the copy-source
data.
MIX: The copy-desti-
nation data will be
combined with the
copy-source data.
Copy Times 1–998 (Max) Number of times the
data is to be copied
MC-909_Ref_e.book 44 ページ ２００５年３月１日 火曜日 午後３時２９分