Selecting a patch/rhythm set, Selecting from a list, Selecting directly – Roland MC-909 User Manual
Page 55: Selecting from a list selecting directly, Patch/rhythm set * (p. 55), Part output assign * (p. 55), Sequencer output assign * (p. 55), Choose a patch/rhythm set from a list (p. 55), Set that you want to use (p. 55), 55 patch edit
55
Patch Edit
Patch/Sample Mode
Top screen of Patch/Sample mode
fig.2-03
Function buttons
Selecting a patch/rhythm set
Selecting from a list
1.
Press [F1 (List)] to display the Patch List screen.
The currently selected patch/rhythm set (the current patch/
rhythm set) will be highlighted.
2.
To select a patch, press [F3 (Patch)]. To select a
rhythm set, press [F4 (Rhythm)].
3.
Use [F1] [F2] or [CURSOR (left/right)] to select a
bank.
4.
Press [F6 (Select)] to finalize your selection.
Selecting a patch by category
1.
In the Patch Select screen, press [F5 (Categ)].
The patches will be displayed by category.
2.
Use [F1] [F2] or [CURSOR (left/right)] to select a
category.
3.
Press [F6 (Select)] to finalize your selection.
Rhythm sets do not have categories.
Selecting directly
1.
In the top screen of Patch/Sample mode, use
[CURSOR] to move the cursor to the patch/rhythm
set name or bank.
2.
Use [VALUE] or [INC/DEC] to make your selection.
Bank
Bank/Number/Name of the
patch (rhythm set) used by each
part (1–16)
Num (Number)
Patch/Rhythm
(Patch Name/Rhythm Set
Name)
Lev (Part Level)
Pan (Part Pan)
Key (Part Key Shift)
Rev (Par Reverb Send Level)
Out (Part Output Assign)
How the original sound of each
part will be output
DRY:
Output to MIX OUTPUT
jacks without passing through
effects
MFX1 (2):
Output through
multi-effects 1 (or 2)
COMP:
Output through the
compressor
DIR1 (2):
Output to the DI-
RECT 1 (or DIRECT 2) jacks
without passing through ef-
fects
RHY:
Output according to the
settings of the rhythm set as-
signed to the part
* “RHY” can be set only when a
rhythm set is assigned to the
part.
Seq
(Sequencer Output Assign)
Output distination from the se-
quencer
INT:
Internal soundgenerator
EXT:
MIDI OUT connector
BOTH:
Both of the above si-
multaneously
[F1 (List)]
(Patch List)
Select a patch/rhythm set from a list (p. 55).
[F2 (Edit)]
(Patch Edit)
Edit the settings of a patch/rhythm set (p. 56,
p. 70).
[F3 (Mixer)]
(Part Mixer)
Specify the volume/pan of each part (p. 33).
[F4 (Effects)]
Apply special effects to the sound (p. 88).
[F5 (Mastering)]
Make settings for the mastering effect (p.
108).
[F6 (BPM/Click)]
Set the tempo, and turn the metronome on/
off (p. 25).
MC-909_Ref_e.book 55 ページ ２００５年３月１日 火曜日 午後３時２９分